In a nutshell: if you’re looking for the exact match between “DN 50”, 2″, “60.3” or “26 × 34”, you’re in the right place!
We untangle every unit here, using the official dimensions of standard EN 10241 together with BSPT thread lengths (ISO 7-1).
Quick-memo size table:

1. Why this article?
Whether you’re a professional plumber or a keen DIYer, you often have to juggle three systems:
- the inch (
″) — an Anglo-Saxon legacy; - the DN (Nominal Diameter) — a commercial “code” defined by ISO;
- the true diameter in millimetres.
Add the difference between welded and seamless pipe and the confusion is complete! This guide helps:
- Installers who need to quote correctly,
- Buyers who must order the right “26 × 34 mm galvanized” item,
- Makers restoring vintage steel heating circuits.
2. Quick reminder of the units
- The inch (
″) dates back to the industrial revolution: 1″ = 25.4 mm, but in plumbing it refers to the historical inside diameter. - DN (Nominal Diameter): rounded values (8, 10, 15 …) that do not equal the real diameter — they’re only codes.
- Outside Ø (OD) / Inside Ø (ID): the only dimensions you can measure with callipers. Our threaded nipples comply with EN 10241; they are cut from medium-weight threading pipe to EN 10255, whose wall thickness ranges from 2.3 to 4.5 mm depending on the diameter. The inside diameter follows from that.
3. Master conversion table (DN ↔ inches ↔ mm)
UX tip: the table is sortable; click a header to reorder.
| DN | Inch | “mm” size (FR) | OD (mm) | Wall (mm) | ID* (mm) | Useful thread R (mm) |
|---|---|---|---|---|---|---|
| 8 | ¼″ | 8 × 13 | 13.5 | 2.3 | 8.9 | 9.7 |
| 10 | ⅜″ | 12 × 17 | 17.2 | 2.3 | 12.6 | 10.1 |
| 15 | ½″ | 15 × 21 | 21.3 | 2.6 | 16.1 | 13.2 |
| 20 | ¾″ | 20 × 27 | 26.9 | 2.6 | 21.7 | 14.5 |
| 25 | 1″ | 26 × 34 | 33.7 | 3.2 | 27.3 | 16.8 |
| 32 | 1¼″ | 33 × 42 | 42.4 | 3.2 | 36.0 | 19.1 |
| 40 | 1½″ | 40 × 49 | 48.3 | 3.2 | 41.9 | 19.1 |
| 50 | 2″ | 50 × 60 | 60.3 | 3.6 | 53.1 | 23.4 |
| 65 | 2½″ | 66 × 76 | 76.1 | 3.6 | 68.9 | 26.7 |
| 80 | 3″ | 80 × 90 | 88.9 | 4.0 | 80.9 | 29.8 |
| 100 | 4″ | 102 × 114 | 114.3 | 4.5 | 105.3 | 35.8 |
*ID = OD − 2 × wall thickness, using the wall thicknesses of medium-weight EN 10255 threading pipe (2.3 → 4.5 mm).
4. How to read a “26 × 34 mm” designation?
Memory rule: in French notations “15 × 21”, “20 × 27”, “26 × 34”…
- the first number ≈ historical inside diameter;
- the second number ≈ outside diameter of the male BSPT thread.
| Value | Meaning | Actual dimension |
|---|---|---|
| 26 mm | Historical ID (before wall thickness) | ID ≈ 27.3 mm for DN 25 |
| 34 mm | Male BSPT thread OD | Nominal OD = 33.7 mm |
🧩 Conclusion: “26 × 34 mm” ⇢ DN 25 / 1″

“26” and “34” are rounded values used on-site for quick identification. For calculations or pressure-drop sizing, always rely on the exact figures in the standard.
5. BSPT thread (R): the backbone of steel plumbing
| Inch size | DN | Taper | Angle | Useful thread length (mm) |
|---|---|---|---|---|
| ¼″ | 8 | 1:16 | 55° | 9.7 |
| ⅜″ | 10 | 10.1 | ||
| ½″ | 15 | 13.2 | ||
| ¾″ | 20 | 14.5 | ||
| 1″ | 25 | 16.8 | ||
| 1¼″ | 32 | 19.1 | ||
| 1½″ | 40 | 19.1 | ||
| 2″ | 50 | 23.4 | ||
| 2½″ | 65 | 26.7 | ||
| 3″ | 80 | 29.8 | ||
| 4″ | 100 | 35.8 |
Need ready-threaded lengths? Visit our pre-cut galvanized steel pipes ↗.
*Minimum useful thread length, EN 10226-1 / ISO 7-1 table 1. Use hemp & compound or PTFE tape for sealing.
For complete dimensional checks and leak-free assembly, read our essential EN 10241 guide ↗.
6. Welded vs seamless pipe – what difference?
Welded pipe: a steel strip is rolled then longitudinally welded (ERW). The seam is visible under a light bench or microscope.
- Pros: affordable, widely available, easy to cut straight.
- Watch out: check the weld seam before re-threading an end.
Seamless pipe: produced hot-finished (HFS) or by extrusion.
- Pros: higher pressure and bending strength; no heat-affected zone.
- Cons: 15–25 % more expensive; slight ovality often needs correction before threading.
How to tell them apart ? Bevel one end: a slight bead or layered look means welded. On galvanized tube, the weld line is often shinier.
7. Typical applications and water flow rates
Reference: cold water at 15 °C, computed on the pipe’s actual inside diameter. The first column uses 2 m/s, the usual flow velocity in plumbing; the second 3 m/s, the limit beyond which noise and erosion become noticeable.
| DN | Inch | Flow at 2 m/s (L / min) |
Flow at 3 m/s (L / min) |
Typical uses |
|---|---|---|---|---|
| 15 | ½″ | 24 | 37 | Domestic fixtures, 8-bar compressed air |
| 20 | ¾″ | 44 | 67 | Wall-hung boiler loops, DHW recirculation |
| 25 | 1″ | 70 | 105 | Fire-hose reels, steam ring mains |
| 32 | 1¼″ | 122 | 183 | Primary manifold in plant room |
| 40 | 1½″ | 165 | 248 | Process air, light fuel oil |
| 50 | 2″ | 266 | 399 | Industrial cooling circuits |
8. FAQ – conversions & technical answers
¼″ — DN 8 — 8 × 13 mm
- ¼″ equals what size in mm ?
- ¼″ equals 8 × 13 mm.
- ¼″ equals what DN ?
- ¼″ equals DN 8.
- 8 × 13 mm equals what size in inches ?
- 8 × 13 mm equals ¼″.
- 8 × 13 mm equals what DN ?
- 8 × 13 mm equals DN 8.
- DN 8 equals what size in mm ?
- DN 8 equals 8 × 13 mm.
- DN 8 equals what size in inches ?
- DN 8 equals ¼″.
→ Order in 1/4": galvanized tube 8x13
⅜″ — DN 10 — 12 × 17 mm
- ⅜″ equals what size in mm ?
- ⅜″ equals 12 × 17 mm.
- ⅜″ equals what DN ?
- ⅜″ equals DN 10.
- 12 × 17 mm equals what size in inches ?
- 12 × 17 mm equals ⅜″.
- 12 × 17 mm equals what DN ?
- 12 × 17 mm equals DN 10.
- DN 10 equals what size in mm ?
- DN 10 equals 12 × 17 mm.
- DN 10 equals what size in inches ?
- DN 10 equals ⅜″.
→ Order in 3/8": black steel · galvanized steel
½″ — DN 15 — 15 × 21 mm
- ½″ equals what size in mm ?
- ½″ equals 15 × 21 mm.
- ½″ equals what DN ?
- ½″ equals DN 15.
- 15 × 21 mm equals what size in inches ?
- 15 × 21 mm equals ½″.
- 15 × 21 mm equals what DN ?
- 15 × 21 mm equals DN 15.
- DN 15 equals what size in mm ?
- DN 15 equals 15 × 21 mm.
- DN 15 equals what size in inches ?
- DN 15 equals ½″.
→ Order in 1/2": black steel · galvanized steel
¾″ — DN 20 — 20 × 27 mm
- ¾″ equals what size in mm ?
- ¾″ equals 20 × 27 mm.
- ¾″ equals what DN ?
- ¾″ equals DN 20.
- 20 × 27 mm equals what size in inches ?
- 20 × 27 mm equals ¾″.
- 20 × 27 mm equals what DN ?
- 20 × 27 mm equals DN 20.
- DN 20 equals what size in mm ?
- DN 20 equals 20 × 27 mm.
- DN 20 equals what size in inches ?
- DN 20 equals ¾″.
→ Order in 3/4": black steel · galvanized steel
1″ — DN 25 — 26 × 34 mm
- 1″ equals what size in mm ?
- 1″ equals 26 × 34 mm.
- 1″ equals what DN ?
- 1″ equals DN 25.
- 26 × 34 mm equals what size in inches ?
- 26 × 34 mm equals 1″.
- 26 × 34 mm equals what DN ?
- 26 × 34 mm equals DN 25.
- DN 25 equals what size in mm ?
- DN 25 equals 26 × 34 mm.
- DN 25 equals what size in inches ?
- DN 25 equals 1″.
→ Order in 1": black steel · galvanized steel
1¼″ — DN 32 — 33 × 42 mm
- 1¼″ equals what size in mm ?
- 1¼″ equals 33 × 42 mm.
- 1¼″ equals what DN ?
- 1¼″ equals DN 32.
- 33 × 42 mm equals what size in inches ?
- 33 × 42 mm equals 1¼″.
- 33 × 42 mm equals what DN ?
- 33 × 42 mm equals DN 32.
- DN 32 equals what size in mm ?
- DN 32 equals 33 × 42 mm.
- DN 32 equals what size in inches ?
- DN 32 equals 1¼″.
→ Order in 1"1/4: black steel · galvanized steel
1½″ — DN 40 — 40 × 49 mm
- 1½″ equals what size in mm ?
- 1½″ equals 40 × 49 mm.
- 1½″ equals what DN ?
- 1½″ equals DN 40.
- 40 × 49 mm equals what size in inches ?
- 40 × 49 mm equals 1½″.
- 40 × 49 mm equals what DN ?
- 40 × 49 mm equals DN 40.
- DN 40 equals what size in mm ?
- DN 40 equals 40 × 49 mm.
- DN 40 equals what size in inches ?
- DN 40 equals 1½″.
→ Order in 1"1/2: black steel · galvanized steel
2″ — DN 50 — 50 × 60 mm
- 2″ equals what size in mm ?
- 2″ equals 50 × 60 mm.
- 2″ equals what DN ?
- 2″ equals DN 50.
- 50 × 60 mm equals what size in inches ?
- 50 × 60 mm equals 2″.
- 50 × 60 mm equals what DN ?
- 50 × 60 mm equals DN 50.
- DN 50 equals what size in mm ?
- DN 50 equals 50 × 60 mm.
- DN 50 equals what size in inches ?
- DN 50 equals 2″.
→ Order in 2": black steel · galvanized steel
2½″ — DN 65 — 66 × 76 mm
- 2½″ equals what size in mm ?
- 2½″ equals 66 × 76 mm.
- 2½″ equals what DN ?
- 2½″ equals DN 65.
- 66 × 76 mm equals what size in inches ?
- 66 × 76 mm equals 2½″.
- 66 × 76 mm equals what DN ?
- 66 × 76 mm equals DN 65.
- DN 65 equals what size in mm ?
- DN 65 equals 66 × 76 mm.
- DN 65 equals what size in inches ?
- DN 65 equals 2½″.
→ Order in 2"1/2: black steel · galvanized steel
3″ — DN 80 — 80 × 90 mm
- 3″ equals what size in mm ?
- 3″ equals 80 × 90 mm.
- 3″ equals what DN ?
- 3″ equals DN 80.
- 80 × 90 mm equals what size in inches ?
- 80 × 90 mm equals 3″.
- 80 × 90 mm equals what DN ?
- 80 × 90 mm equals DN 80.
- DN 80 equals what size in mm ?
- DN 80 equals 80 × 90 mm.
- DN 80 equals what size in inches ?
- DN 80 equals 3″.
→ Order in 3": black steel · galvanized steel
4″ — DN 100 — 102 × 114 mm
Also written 100 × 114 mm.
- 4″ equals what size in mm ?
- 4″ equals 102 × 114 mm.
- 4″ equals what DN ?
- 4″ equals DN 100.
- 102 × 114 mm equals what size in inches ?
- 102 × 114 mm equals 4″.
- 102 × 114 mm equals what DN ?
- 102 × 114 mm equals DN 100.
- DN 100 equals what size in mm ?
- DN 100 equals 102 × 114 mm.
- DN 100 equals what size in inches ?
- DN 100 equals 4″.
→ Order in 4": black steel · galvanized steel
Technical questions
- What is the minimum wall thickness for DN 25 pipe ?
- 3.2 mm (medium-weight EN 10255 threading pipe).
- Is there a BSP thread for DN 65 ?
- Yes: taper thread R 2½″ ISO 7-1.
- What pressure can a welded DN 50 pipe handle ?
- The threaded pipe is rated PN 20 bar. Malleable iron fittings hold 25 bar up to 120 °C and 20 bar at 300 °C: an assembly is limited by its weakest part.
- How do I tell welded from seamless pipe ?
- The welded type shows a longitudinal seam; seamless is uniform.
- DN 50 – what’s the max water flow ?
- ≈ 266 L/min at 2 m/s, ≈ 399 L/min at 3 m/s.
- Hemp or PTFE for sealing ?
- We recommend hemp + paste above 1″, and PTFE tape for quick maintenance up to 1″.
- Can I thread an existing galvanized pipe ?
- Yes, but spray cold-galv on the bare steel afterwards.
- Torque for a ¾″ BSPT joint ?
- Tighten by hand, then a quarter to a half turn with a wrench. Our suppliers publish no torque figure in N·m for these taper threads: this fitting rule is what counts.
- Remove galvanizing before welding ?
- Yes – strip about 30 mm to avoid toxic fumes.
- Thread depth for a DN 40 housing ?
- ≈ 19.1 mm (useful thread length, EN 10226-1).
9. Best installation practices
- Tightening: hand-tight, then a quarter to a half turn with a wrench; another quarter-turn if it seeps.
- Cut tolerances: ± 1 mm for DN ≤ 40, ± 2 mm above.
- Inspection: plug gauge, dye-penetrant or borescope for DN ≥ 80.
10. Conclusion & next steps
You now master DN-inch terminology and sound assembly practice. To go further:
- Order ready-to-install lengths in our pre-cut galvanized-pipe range ↗.
- Read the essential EN 10241 / ISO 7-1 guide ↗ for full thread dimensions and tightening rules.